Made from recycled materials this bird feeder turned into bright spot in the garden, something the birds LOVE. For Complete Details Make sure to Visit my blog, Garden Up Green. Enjoy!
With this project we started with Terra Cotta pots that have sitting around the garden waiting for to do something with them. Other supplies include fabric swatches, Mod Podge, scissors and later we’ll be using some scrap wood and a drill.
Begin by cleaning the exterior of the pot, I should have probably sanded but I didn’t and the good news is that it didn’t really matter because this project is outside and it’s holing up good.
I cut fabric swatches into squares and rectangles then began applying them in a mix match formation directly to the pot. There really wan’t a plan I just wanted to get the main container covered.
I used small clay pots for the bird feeder part. This will be filled with bird seed on days when it isn’t raining. You want to use a screw and bolt to apply and use a manual screw driver because these pots break easy.
I took two pieces of scrap wood making sure that bottom piece fit tight against the walls of the pot and then drilled them together. The final step with here was to connect the pot to the top piece of the wood. I used lava rock to fill in the base for additional stability and then filled with dirt prior to adding plants.
Adding plants and a few twigs was the perfect touch to welcome the birds into this unique recycled bird feeder planter. For more detailed instructions step over to the blog. Now what are you going to make with Mod Podge?
I’d like to invite you to visit my blog where I share DIY projects for the home and garden and much more. New subscribers always receive our free gift –Sign Up
and always enjoy!
Material I used for this project:
Mod Podge (Hobby Lobby)
To see more: http://www.gardenupgreen.com/2017/03/diy-decoupage-birdfeeder-planter.html